meatrock Posted February 21, 2005 Report Posted February 21, 2005 (edited) In stalled new clutch. Still slipping bad. Could the adj, bolt in the case out of adjustment or bad cable. Thanks for the help Edited February 21, 2005 by meatrock Quote
i12gofast Posted February 22, 2005 Report Posted February 22, 2005 In stalled new clutch. Still slipping bad. Could the adj, bolt in the case out of adjustment or bad cable.Thanks for the help 327258[/snapback] You didnt lose that litle balll bearing inside the shaft when you took out the adjuster did you? Quote
ssanddemon Posted February 22, 2005 Report Posted February 22, 2005 Is the pointer in the case lining up with the mark on the clutch lever at zero free play? That is the base adjustment for the clutch. The book will detail this for you; that is where I would start. Quote
i12gofast Posted February 22, 2005 Report Posted February 22, 2005 also make sure that the little mark on the pressure plate lines up with the mark on the clutch boss or else it will never engage..... if you get a manual it will explain in better detail and you can see pics of what they are talking about... it helped me out alot, i had the same problem from some little mistake i made like that... Quote
bogart Posted February 27, 2005 Report Posted February 27, 2005 also make sure that the little mark on the pressure plate lines up with the mark on the clutch boss or else it will never engage..... if you get a manual it will explain in better detail and you can see pics of what they are talking about... it helped me out alot, i had the same problem from some little mistake i made like that... 327866[/snapback] well i have a rz350 book for my rz350.the book is worthless it doesnt expalin anything.clutch adjustment on page 24 it has one picture and no details.im gonna have to go get a new book this thing is not good for anything Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.