sandgrencivic2k1 Posted February 14, 2005 Report Posted February 14, 2005 I have a set of dune ported cylinders, still on my bike. I am thinking about getting the new cheetah cub 4mm stroker. So I am just seeing how much I can sell them for, to see how much I would have to save to get the cub. They are dune ported from Adrenaline powersports. I only have 5 tanks of fuel through them. At adrenaline they dynoed the same ones on a different bike and got 64whp. They have a lot of power, great for playing in the dunes and some hill shootin, been able to beat all banshees that were ported w/out 4mm. Very strong. I would through in the pistons, the cylinders are 0.020 which I had done when ported, so the pistons are fresh. Give me some numbers you guys would give, so I consider it. Thanks. Quote
9603banshee Posted February 14, 2005 Report Posted February 14, 2005 You should be able to get about $450 shipped I would think, since they're only 20 over on the bore, my 2 cents Quote
kenr74 Posted February 15, 2005 Report Posted February 15, 2005 The problem with cylinders that are already ported is that the buyer doesn't really know what they are getting. I've seen virgin cylinders go for a lot but ported ones usually don't do very well, at least on eBay. With the Cheetah Cubs coming out there are going to be a ton of ported cylinders for sale so you better sell now if you need the $$. Quote
buddha440ex Posted February 16, 2005 Report Posted February 16, 2005 did you have to weld your crank to run these cylinders??? my stockers and how much cash? Quote
STLbanshee Posted February 16, 2005 Report Posted February 16, 2005 what is the cheetah cub..what am i missing here? Quote
sandgrencivic2k1 Posted February 16, 2005 Author Report Posted February 16, 2005 did you have to weld your crank to run these cylinders??? my stockers and how much cash? 324093[/snapback] No I did not have to weld my crank to run them. I'm not looking for stock cylinders, what would you be willing to pay? I am debating on selling them, it depends on how much the 4mm will be. Make an offer and I'll keep in you in mind Quote
sandgrencivic2k1 Posted February 16, 2005 Author Report Posted February 16, 2005 what is the cheetah cub..what am i missing here? 324135[/snapback] They are a new mono block cylinder like the cheetah motors. Just not as big as them, they are making a lot of hp out of the 4mm's. Look under reviews, or images and there are a couple threads on them. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.