cv kit and carb size?

[bobbo'shee]

i drag raced a stock banshee with t5's this weekend and i killed him of the line by like 3 quads in gears 1-4 when i got to 4-6 he creeped up on me.. im running a .40 over wiesco's, vforce 2's, reed spacers, cv intake 35mm with a uni clamp on..i have fmf fatty golds. i think i shoul have killed the kid by alot more or is it just me...?im wondering if i need a 38mm for more top end and do some sprocket changes?

[Flyin_Shee]

Try messing with your gearing before you go into expensive mods. What gearing are you running right now? Sounds like maybe you need to go up a tooth, especially with the mods you have it should have no problem pulling an extra tooth.

[sredish]

I doubt a 38mm is gonna do what you want it to do. I'd start playing with some gearing. What is your current gearing setup? If your running stock 14 up front, get rid of that. With my portwork, I could run a 16 front and even a 17 on dirt.

[FIRST BANSHEE]

I agree with the others, gear up a tooth if your running a 14 tooth. I run a 38mm on mine and the 15 tooth gear did way more for the top end.