deathmetal5150 Posted January 30, 2005 Report Posted January 30, 2005 my buddies bike was just rebuilt, all new crank, top end, clutches, you name it. sealed up the cases, ready to go ridin. however, had a problem with the wiring, and for the hell of it, we switched pipes on it, when we did oil just flew out of the pipe. there was a lot of oil sitting in there. can anyone tell me why? i was thinking maybe because he kept trying to kick it over when it wasnt starting and just flooded the cylinders. what do you think? Quote
banshee04le Posted January 30, 2005 Report Posted January 30, 2005 If it was in the right side pipe (clutch cover side) the crank seal was damaged or installed backwards or he tried to reuse the old one. Either way, if you have tranny oil in your pipe the problem is a bad crank seal. Quote
deathmetal5150 Posted January 31, 2005 Author Report Posted January 31, 2005 If it was in the right side pipe (clutch cover side) the crank seal was damaged orinstalled backwards or he tried to reuse the old one. Either way, if you have tranny oil in your pipe the problem is a bad crank seal. 314512[/snapback] i dont think it was tranny oil, it woulda had a different color to it. this was straight oil mix i believe Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.