installing toomeys couple ?s

[BigDaddyK]

I tried to search but couldn't find anything in the limited time I had. I bought the toomey kit with the jets. Should I keep the OEM needle in the same position and just use the 280 or so I put in the needle toomey gave me as well.

 

My mods will be t-5s lid off the airbox for now

sea level 60-70 degrees outside

 

 

Thanks Guys a lot.

[sredish]

Keep the stock needles in, the toomey, aka Blaster, needles seem to be problematic when jetting. Your mains could be from 280 to 310 depending on other mods and elevation and such.

[Dakota02]

THose are really blaster needles that toomey gives u, i did not know that. Maybe ill put those stock ones back in and see if it runs any better. Thanx for the info sredish. Can't wait until summer though wen i can afford to rebuild. Lookin into a gorr woods port and some ptr mids. I cant wait.

[sredish]

THose are really blaster needles that toomey gives u, i did not know that. Maybe ill put those stock ones back in and see if it runs any better. Thanx for the info sredish. Can't wait until summer though wen i can afford to rebuild. Lookin into a gorr woods port and some ptr mids. I cant wait.

 

 

Anytime... hope it works out.