nickt5174 Posted January 24, 2005 Report Posted January 24, 2005 I bought a RAD axle carrier second hand off of EBAY. Carrier is fine but I found out when I wanted to mount my rear brake caliper that I was missing some spacers. Does anybody know where I can get them or maybe if I can make them so how. Help would greatly be appriciated! Thanks Quote
ledofthezep Posted January 24, 2005 Report Posted January 24, 2005 Not sure, I couldn't find a website for them...have you tried contacting the seller about one? Are you missing the mount or just the spacers? If just the spacers, you could probably get some at a hardware store or just use washers. Quote
nickt5174 Posted January 24, 2005 Author Report Posted January 24, 2005 im missing just the spacers. I tried to find the hardware vendor but had no luck. I guess i could try to fab something up but I don't want to do shit job with a bunch of washers. Those spacers should be like 2 inches long. Quote
Redlined Posted January 25, 2005 Report Posted January 25, 2005 im missing just the spacers. I tried to find the hardware vendor but had no luck. I guess i could try to fab something up but I don't want to do shit job with a bunch of washers. Those spacers should be like 2 inches long. 311385[/snapback] "Ace is the place" They always seem to have that sort of thing. Quote
nickt5174 Posted January 25, 2005 Author Report Posted January 25, 2005 I was @ home depot today and I found some alluminum threaded nipples that I might be able to use. Going to have to cut off the threaded part but if I get my size right they might work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.