J arms

[89Steeda]

Do J arms use the same bushings as an arms or does it use a longer one?

[Wallrat]

They're the same. Might as well buy the cheap delrin ones. I got thru a set every season.

[Holyman]

Better to buy bearings and never mess with 'em again.

Email me if you're interested... [email protected]

[westexgt]

I also need a set of J-arm bushings, where can I find some cheap ones?

 

Thanks,

Kevin

[Holyman]

$25 will get you the 4 bearings you'll need for the J arms only including shipping by Priority Mail.

[BdBanshee]

$25 will get you the 4 bearings you'll need for the J arms only including shipping by Priority Mail.

308499[/snapback]

 

That's a good deal guys, last much longer than cheap bushings too.

[89Steeda]

Thanks guys, I just pressed out my 1987 stock bushings. They look new and are tight still. Thats what grease and only riding in the dunes will do for ya. Who said sand is hard on a rig?

[Holyman]

Yeah grease rules. It's probably one reason why the Banshee has the garbage plastic bishings. It takes longer to figure out they are worn out than a bearing. But once grit gets into the bushing, it will wear out everything else.

[89Steeda]

My stock bushings are not even really plastic. They seem to be some type of bak-o-lite. Kinda crumble like clay.

[Holyman]

Yep that's the factory stuff. Darn near useless.