89Steeda Posted January 6, 2005 Report Posted January 6, 2005 Do the stock airbox tabs interfere with K&N pod filters? I'm gonna cut the stock pipe "bumper" tabs, the lower front fender arm mounts and whatever else off that I don't need before I go to the powdercoater. Anything else I might want to look at? Quote
1sreamin350 Posted January 6, 2005 Report Posted January 6, 2005 I cut mine off! the pods are able to sit in there perfect now. As for other stuff, cut the stuff you realy dont need. You can use zip ties to hold stuff in place like cables etc.. This will also give you some weight reduction. Quote
BansheeBoy17 Posted January 6, 2005 Report Posted January 6, 2005 I grinded off the stock pipe mounts and heel guard mounts. Quote
bansheefreak Posted January 7, 2005 Report Posted January 7, 2005 yeah cut of the pods the airbox sits on cus they will work a hole in k&n filters Quote
01bansheeke Posted January 7, 2005 Report Posted January 7, 2005 I cut off all kinds of shit hope i didn't cut too much. I filled all my grinds with ALL METAL. its goes on like a puddy..but its metal. not sure how it works but it kicks ass. Quote
Timmy301 Posted January 8, 2005 Report Posted January 8, 2005 I grinded off the stock pipe mounts and heel guard mounts. 302634[/snapback] Hey dude,MOVE THAT GAS CAN!!!!!! Quote
BansheeBoy17 Posted January 8, 2005 Report Posted January 8, 2005 lol yea i noticed that can was there like 2 minutes after i started grinding... im like hmm i should move that Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.