Quinlan Posted January 4, 2005 Report Posted January 4, 2005 (edited) Has anyone ever heard of these before? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...4516865202&rd=1 I have a set of cylinders that need to be sleeved, just curious if any has ever seen or heard of these before. The exhaust part is what i'm really curious about Thx Edited January 4, 2005 by Quinlan Quote
sparkzilla Posted January 5, 2005 Report Posted January 5, 2005 Has anyone ever heard of these before?http://cgi.ebay.com/ebaymotors/ws/eBayISAP...4516865202&rd=1 I have a set of cylinders that need to be sleeved, just curious if any has ever seen or heard of these before. The exhaust part is what i'm really curious about Thx 301894[/snapback] Never heard of them before but it sure sounds good.. Quote
jinx44 Posted January 7, 2005 Report Posted January 7, 2005 The bridged exhaust would help if the bore size was larger. You can almost open the exhaust on a stock sleeve untill it hits the transfers. I would think you would have to weld in some aluminum on the backside of the bridge for support and as a heat sink. It looks to me like that bridge would be easy to crack if it gets hot. Quote
Quinlan Posted January 7, 2005 Author Report Posted January 7, 2005 Thx for info Jinx, still debating on them or not. Not much info anywhere on them Quote
Big Blue Posted January 7, 2005 Report Posted January 7, 2005 some people on planet sand were talking about them but i think they were taking the bridge out after installing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.