H250RHATER Posted December 27, 2004 Report Posted December 27, 2004 im getting a mid range port job " an mx / wood's " i just wanted to know what pipe is better w/ porting. well just an opinion from any one else Quote
banshee370 Posted December 27, 2004 Report Posted December 27, 2004 im getting a mid range port job " an mx / wood's " i just wanted to know what pipe is better w/ porting. well just an opinion from any one else 298577[/snapback] T3's and CPI's are mainly top end pipes. I dont see why you would want either of those pipes with the porting your getting. If its between the 2. then I'd say CPI's since they will have a little more low end than the T3's. Stay away from cut T3's since they will have even less low end power Quote
H250RHATER Posted December 28, 2004 Author Report Posted December 28, 2004 the reason i got the cpi's is because the track i ride at has big strait aways where u can get in top speed (u need it to stay in the leed of the pack around there) also there are big gaps in between jumps and there are jumps each at least 30-40 ft long so i need the big power to hit them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.