#51 BANSHEE Posted December 19, 2004 Report Share Posted December 19, 2004 alright guys i decided to get the shee port and polished my mods are FMF SST exaust, K&N filter without lid ,polished reed cage, and pa elavation. You guys got a starting point for me Quote Link to comment Share on other sites More sharing options...
oldbanshee Posted December 19, 2004 Report Share Posted December 19, 2004 Might wanna trade your sst's for some fatty's or different pipes. SSt's aren't made to work with ported motors. Make sure you run an outerwear, and have a nossadapter,or a prodesign for the filter to clamp on. Get an aftermarket head, or get your stocker milled. Quote Link to comment Share on other sites More sharing options...
sredish Posted December 19, 2004 Report Share Posted December 19, 2004 Porting can vary a lot. And by a lot, I mean a lot. You could be at a 330, or a 390 depending on how much porting and how opened up they are. I'd say go try some 350s and see where your at. Your really gonna have to do some plug reading to dial in a ported motor, and if your not familiar with that, time to do some reading up on it. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted December 20, 2004 Report Share Posted December 20, 2004 I agree w/ Sredish. Porting can be very different w/ different builders. I'd start w/ 330's and try different needle clip positions. Read your plugs, they tell all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.