many 2.2-2.5 turbo parts .21 rs4s for shee parts

[bogart]

all parts are located just north of detroit

almost all these parts are for dodge 2.2-2.5 turbo cars

 

looking for anykinda shee parts peformance parts would be ideal.i also need a frame chrome swinger possible motor just let me know what ya got.or what you want to buy

 

 

i got a nice strut tower brace i started to polish up brand new never used bought for my 89 shelby csx-vnt will fir all p bodys 100$

2p intake with rail has a good port job to it and opened to a 52mm tb i paid 200 for it then 75 for porting asking 200$

 

 

rebuilt 555 by dean still has very very low miles under 50 take a loss 500$

 

3in mandrel ss dp for shadow 150$ all exaust parts are brand new in the box

3in mandrel ss catback pipes 180$

3in dynamax untra flow muffler 100$

braided turbo lines for t2 100$ shipped

 

 

88 csxt grill slightly broken but still fixable couple tabs broken 75$

3 stock intercoolers 2 from spirit r/ts 1 from i think a daytona 65$ each

 

1 89 turbo minivan harness has some cuts.came from a running van 75$

1 garrett t1 turbo came from a 86 turbo z was rebuilt at sometime.i took the housing off looked at it today doesnt spin much but has no shaft play with exaust manifold and swingvalve 75$

1 89 shadow 2.5 t1 smec auto 75$

1 89 minivan smec 2.5 auto 75$

1 89 csx-vnt stock sbec in great shape 68k miles 150$

2 85 glht power modules came from running cars 30$ each

1 socketed 85 glht lm 18psi 2.5 in exaust intercooled 100$

90 t1 airbox 20$

2 t2 air boxes 25$ each

3 lower intercooler hoses not sure what there from 30$ each

ns1 shelby floor mats the rear in blue lettering and a custom made black set for the front all never really used was in for shows make offer

 

aftermarket loco 16in rims with decnt tires good enough to go have fun smoking the tires 200 pick only

 

mitsu turbo 2.5in swing valve complete 100$+shipping

 

shelby valve cover great shape just needs paint 200+ shipping

 

got a few ac condensors from various shadows and one from a daytona 25 each

 

30/30 boost guage carbon fiber with yellow letters brand new only hooked up to see how fare off the factory unit is 65 shipped

 

89 turbo mini harness 80

 

all kinds of intercooler piping 2 45s 2 90s straight pipe one 2 foot aluminum pipe a few 2 foor straight pipes not alum 75$ for them all plus shipping it might be 3 45s and 3 90s i will see its a box full of them

 

many diffrent engine bay harnesses i think a csxt cut harness a datytona thats good plus like 2-3 ,more not sure what they r make offer just looking to move these asap taking up to much room

 

1 cb 2.5 crank good shape 50$

1 cb 2.5 crank was turned 10 has minir surface rust from sitting for awhile 40$

 

 

 

87 block has 3 spun bearings cracked ear not bad still usuable 60$

 

89cb just needs to be bored 10over 50$

 

mitsu turbo complete good shape 100$

mitsu turbo leaks from oil drain back hose came from running car but leaked some could be fixed 100$

 

s3t3 turbo 0 miles on sence rebuild .48 exaust housing has no swingvalve was gonna use on my glht but i think im gonna go a little bigger good for 330hp. 400$

 

2p intake complete everything but the tb good injectors pfr rail and harness.nice paint really good shape 190$

 

2p intake bare no rail injectors and so on 140$

 

3 mitsu 2.5 in swingvalve 40$each

 

85 glht tranny 525 ran with no problems i bought the car with just the tranny.would like to get 100$ from it

 

vnt turbo needs rebuild but in great cosmetic shape 100$

 

i have another that came from a running van but it didnt seem to shift sometimes.never slipped tho might need rebuild 65$

 

this one has bad clutches but shifted firm before the chattering 50$ needs rebuild

 

shadow louver is really good shape just needs fersh paint 60$

 

3 visonik 900xd amps 1500wrms strappable amps i had alot of these was using 4 per sub in my audi with a wall been setting around for a year or so.2 are brand new one is used slightly 200 for the used one and 225 for the new ones plus shipping

 

thinking of selling my pocket bike 47cc shaved the seat and fiberglassed it for6 more inches to sit on.just gotta throw some paint were i fiberglassed.runs good exaust is slightly broke in the back were the muffler is still fine just a tad louder. paid 320 for this on ebay and bought another back rim was 65$.comes with extra back rims thats still usable just has small chip were bolts go.160

i might beable to get another one from a buddie for 150 also fliped backwards once and i think the exaust is missing the muffler part 150$

 

2 hpi rs4s both with os max rz .21 motors rated at 2.4hp up to 32000 rpms.one is almost brand new with very very low run time.bought brand new super nitro rims and tires 100$ and a murcialago body.motor has a few tanks of gas thru it.comes with high torque bb servos and a mars ex1 remote.car is not for a the average person i cant drive this in the street way to fast.me and a budiie always went to a huge parking lot and we still never got the to top speed.they both have 2 speed trasmissions and 3 shoe race clutches.the other one is used and it shows.been flipped many times but thats what happens.this one has a beat up skyline body the motor is still runs great has maybi 2 gallons run in it maybi more.scratches on the heat sink.i think this one might need a servo a battery tray and a on off switch.

comes with the jump box with built in glow plug costs just over 100$ i also have a cheap remote that came with a tmaxx extra set of rims in decent shape and misc stuff

i will sell it all but the one beat up rs4 for 650$ thats the price of the motor jump box and rims

Edited December 12, 2004 by bogart

[bansheeracer18]

any pics of the 3in dynamax untra flow muffler

[bogart]

any pics of the 3in dynamax untra flow muffler

294506[/snapback]

non now cant find my camera.go to www.fwdperformce.com the will have pics there

[bansheeracer18]

take n e trades for the poket roket or amps

[bogart]

take n e trades for the poket roket or amps

302970[/snapback]

 

[email protected]

sure what do you have email me at