Klotzban1 Posted October 10, 2004 Report Posted October 10, 2004 Does anyone have a nice set of 89 rear hubs they want to part with? I have a set of rear aluminum wheels that have a larger bolt pattern than my 97. Quote
bansheeboy2004 Posted October 10, 2004 Report Posted October 10, 2004 Do you need the ones that have a larger bolt pattern then like a 1996 if so ive got some off a 1990 they have a wider span i took them off and put some new ones so i could fit all my tires on them let me know Quote
Klotzban1 Posted October 10, 2004 Author Report Posted October 10, 2004 I'm gonna measure the bolt holes of these wheels...brb.........ok, back..I measured the holes straight across from each other outside to outside of lug holes and come up with around 6 1/2 ". Quote
bansheeboy2004 Posted October 11, 2004 Report Posted October 11, 2004 ill measure them in the morning and get back to you so the ones you need, need to be 6 1/2 or those are the ones you have Quote
Klotzban1 Posted October 11, 2004 Author Report Posted October 11, 2004 6 1/2" is right. Looking down at the wheel for the 89 I measured furthest left of one hole straight across to the furthest right of the hole straight across. Some say its better to measure middle of one hole to the middle of the opposite side. I can get that measurment too if you need. The stud holes I think are all the same on all banshees unless they were setup with over size lugs. What color are the hubs you are selling? I run a Dura Blue 2+2 Eliminator axle with my stock 97 spindals right now,...The wider spindals you have should slide right on like the 97 ...right? Thanks ahead. Quote
westexgt Posted October 11, 2004 Report Posted October 11, 2004 I have a set of clean 89 HUBs if that is what you want, because I need a set of the newer ones. Kevin Quote
bansheeboy2004 Posted October 12, 2004 Report Posted October 12, 2004 6 1/2" is right. Looking down at the wheel for the 89 I measured furthest left of one hole straight across to the furthest right of the hole straight across. Some say its better to measure middle of one hole to the middle of the opposite side. I can get that measurment too if you need. The stud holes I think are all the same on all banshees unless they were setup with over size lugs. What color are the hubs you are selling? I run a Dura Blue 2+2 Eliminator axle with my stock 97 spindals right now,...The wider spindals you have should slide right on like the 97 ...right? Thanks ahead. ya they will slip on the same axle but im like 92 they changed the hubs to a smaller bolt battern. So the wheels you have are bigger than the hubs you have now if so ive got the right ones Quote
sparkzilla Posted October 12, 2004 Report Posted October 12, 2004 I have a set of the hubs you are looking for and 2 sets of 10" rears to fit them. I will make a good deal on them. Let me know if you are interested. Email me [email protected] Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.