sweetshee4312 Posted September 26, 2004 Report Posted September 26, 2004 I got my banshee going, still tryin to work the bugs out(been tryin for 3 or 4 months now)...I cant get this damn jetting, it just boggs on bottom, and no matter wha i do with the air screw or pilots it doesnt do ne thing.....it seems like it may be rich, casue like it i rev it quick let off then let it go to idle then rev it back up, its not that bad...... But say if i let it idle for 10 seconds or longer its really bad when i try to blip the throttle.... But the other problem im having is everytime i jump or hit a big bump the engine cuts out, or like bogs only while in the air...as soon as i hit the ground its good...Someone sugested the floats to me, but i dont even know how to adjust them, i tryed lookin my my clymers but its still unclear to me... Quote
sredish Posted September 26, 2004 Report Posted September 26, 2004 floats or maybe rear brake adjustment? maybe the rear axle quits spinning and bogs it some. i highly doubt it, but one view anyway. Quote
sweetshee4312 Posted September 27, 2004 Author Report Posted September 27, 2004 can ne one just tell me how to adjust the floats? Quote
ledofthezep Posted September 27, 2004 Report Posted September 27, 2004 Get yourself a clymer manual, you will not regret it. It will walk you through the carbs, and anything else pretty much. Couldn't even tell you how many times that manual has saved my arse. Quote
sredish Posted September 27, 2004 Report Posted September 27, 2004 Get yourself a clymer manual, you will not regret it. It will walk you through the carbs, and anything else pretty much. Couldn't even tell you how many times that manual has saved my arse. ain't no chit!! Quote
siezed-up Posted September 27, 2004 Report Posted September 27, 2004 Jetting Faqs Try this link it should show you what you need Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.