Bmatlock Posted September 19, 2004 Report Posted September 19, 2004 I have a banshee, .60 over, Pro circuit pipes and jetted(don't kow which ones) Hotrod crank. I need to know a starting point on how many turns out in the screws. Please help Thanks, Brian M. Quote
tats4life Posted September 19, 2004 Report Posted September 19, 2004 on stock carbs try 2 full turns out from bottom. Quote
Bmatlock Posted September 19, 2004 Author Report Posted September 19, 2004 I have tried what the book says on 2 turns out from bottom for stock carbs. It was still like it wasn't hitting right on the low end till the powerband kick'd in. After the band kicked in it was fine. I am going to try 1 1/2 turns today. I went up all the way to 3 and saw no difference other than more smoke and real rich sluggish and didn't want to idle after warm up. Brian M. Quote
00BANSHEE Posted September 19, 2004 Report Posted September 19, 2004 The more turns you go out you are letting in more air. ie, 3 turns out is leaner then 2 turns out. What size pilot are you running? Quote
Bmatlock Posted September 19, 2004 Author Report Posted September 19, 2004 I have no idea what size pilots they are. I just got back from a ride and it was 100% better at 1 1/2 turns out, Brian M. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.