MRMOONEY Posted August 31, 2004 Report Share Posted August 31, 2004 I am going to be parting out my drag bike. i have Pvl +4mm (+5mm rods) crank wesico hot rods (about 10-12 races on it trued and welded) PLus 10 over round housing draglite swingarm (build by dave moore) full set (front and rear) alum strus with heim joints wheelie bar made from 4130 chromo with tire and heims 2 sets of carbs 1 set 34mm mikuni set up for alky by dave moore 1 set of 36mm mikuni set up also by dave moore (both sets come with throttle cable and i have the k&n's for the 34's) rear bearing carrier lonestar round house lonestar excaliber axle cool head with studs and orings (domes are trashed) 8 plate clutch (hison billet proof basket) 2-5 override trans done by dave moore set of 34-34mm intakes (mod quad) have 1 ride on them drag ported cylinders (cylinders went 4.51 with 230lb riders stock frame) 1 will need relsleved other is fine porting done by mac racing. stock j arm frame powered coated floresenct orange, no craks or bends but needs powerd coated again badly j arms a arms, front shocks rear shock parting the hole bike out so let me know if you need anything have alot more stuff cant remember it all right now Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted August 31, 2004 Author Report Share Posted August 31, 2004 pvl 300 shipped obo crank 375 shipped obo swinger w carrier 425 obo w out 325 stuts 75 shipped wheelie bar 250 plus shipping 34mm 275 36mm 300 axle with all hubs 250 obo trans with drum star forks gears and shafts 325 plus shipping coolhead with domes (domes trashed ) 160 shipped clutch complete with hison basket 200 plus shipping obo cylinders (1 needs sleeved) 125 shipped 125 shipped intakes (1 ride ) anything else just ask or make an offer Quote Link to comment Share on other sites More sharing options...
gonzoret Posted August 31, 2004 Report Share Posted August 31, 2004 what about rear paddles? Quote Link to comment Share on other sites More sharing options...
Holyman Posted August 31, 2004 Report Share Posted August 31, 2004 Will you sell the carrier by itself and will it fit the stock axle? Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted August 31, 2004 Author Report Share Posted August 31, 2004 yes it will fit stock axle, the rear tires i have are junk 1 tire is missing about 6 paddles the other side is perfect, the wheels are good. make an offer on the carrier Quote Link to comment Share on other sites More sharing options...
Holyman Posted August 31, 2004 Report Share Posted August 31, 2004 yes it will fit stock axle, the rear tires i have are junk 1 tire is missing about 6 paddles the other side is perfect, the wheels are good. make an offer on the carrier OK... $40 for the carrier. Now that that's out of the way, send me an email with what you want for it and perhaps a pic. Does it use tapered bearings or ball bearings? IHRbearings@peoplepc.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.