Noob Banshee Posted August 29, 2004 Report Posted August 29, 2004 Ok there a bolt stuck into my frame and i tryed drilling it out, but there is still some of the bolt inside all around. how do i get the rest of it out? do i drill the same size as the hole or what i have no clue i cant get the frame powercoated with that in there...... Quote
J.J. Posted August 29, 2004 Report Posted August 29, 2004 If you've drilled the bolt and the hole has not damaged the existing threads then you can put an easy-out in there to remove the rest of the bolt. These are available at most hardware and tool shops. Quote
Forcefed Posted August 29, 2004 Report Posted August 29, 2004 What was that bolt used for? Tap it. Can you enlarge the hole and use the next size bigger hardware? It`ll be O.K. man....deep breaths! Quote
txblueshee Posted August 30, 2004 Report Posted August 30, 2004 whats e z out? E-Z out is a busted screw extractor, it spins backwards to back the screw out. You can pick one up at the local hardware store. Mike Quote
Noob Banshee Posted August 31, 2004 Author Report Posted August 31, 2004 i would but its to the threads ...so now what should i do? Quote
racer Posted August 31, 2004 Report Posted August 31, 2004 so, if you use an ez out it will get it anyways. you just have to have the right bit. i promise they work damn good. Quote
kenr74 Posted August 31, 2004 Report Posted August 31, 2004 Yep, get a set of the EZ outs. They are maybe $15-20 for a set. Those things have save my ass so many times. Especially getting those POS Yamaha bolts out. Quote
ledofthezep Posted August 31, 2004 Report Posted August 31, 2004 If ya can't EZ-out it,...drill it out & re-tap it. I've had to do that on both left side peg bolts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.