fitting lonestar +2" +1" a-arms on banshee

[supercoop]

can someone tell me how difficult it is to fit lonestar +2" +1" a-arms to the banshee. Also, I know that you need to purchase longer brake cables as the standard ones won't fit on. Is there anything else I need to purchase for the a-arms that I don't get with them??

 

thanks......

[J.J.]

The hardest part will be getting the ball joints off, to avoid damage to the old ball joints, I recommend using a picklefork, alternatively just knock them out with a BFH. I'm not too sure if the spindles require reaming with the LSR arms, hopefully not.

 

With a bit of creative re-routing the stock brake lines should reach.

 

For setting the camber & caster, go directly to LSR's website and look in the installation guide, it's pretty good.