BansheeBoy17 Posted July 27, 2004 Report Posted July 27, 2004 Alright i got everything together , and shee starts first kick, but i have no low end at all and the top spits and sputters and skips... Im thinking this could be from air getting through my cylidners because i didnt hone or bore when i put new pistons in? I talked to 3 engine builders and they looked at my cylinders and said it didnt need a hone even with light scratches but im thinkin this coudl be the only reason why its runnin like shit... what else could it be? Should i buy the next size up pistons and get it bored? Quote
J.J. Posted July 27, 2004 Report Posted July 27, 2004 You should always hone when putting in new rings. Measure the compression before you open it all up again and post the numbers, the rings will take longer to bed in without honing. I honestly think you have an airleak somewhere, re-check the carb boots, reed cage gasket and the choke tube between the carbs. Quote
racer Posted July 28, 2004 Report Posted July 28, 2004 make sure that your slides are in correctly, thats what was wrong with mine. Quote
sweetshee4312 Posted July 28, 2004 Report Posted July 28, 2004 this sounds exaccctly like wha mines doin....bogs of bottom, and sputters, and sounds liek shit on top, no power.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.