Clutch

[doltz]

I replaced my clutch & everything works good.

 

The problem is in my cable.

 

I purchased a brand new Vitos cable thinking my adjuster bolt on the handle bars would go farther in due to a non stretched cable.

 

After I set it all up my adjuster bolt is still only 3/8" into the perch.

 

Everything works fine but it seems like I should have more room for future adjustment.

 

Any help would be appreciated.

[Wassup350]

You need to adjust it down at the clutch. If you take the clutch cover off there is an adjuster screw and a locknut on the center of the clutch. You have to loosen up that locknut and turn that adjuster screw so that the point on the clutch arm lines up with the point on the crankcase (you will see what im talking about.)

[doltz]

Thanks but I did all that & it works fine I am fust wondering why I dont have more threads @ the handlebar perch.