DirtRider Posted June 26, 2004 Report Posted June 26, 2004 i want to mount a simple tether switch for the kill switch. i did a search but didnt find much on it. where is the best place to mount it? i dont want it visible and i dont want it in the plastic. anyone got any picts? Quote
Brian G Posted June 26, 2004 Report Posted June 26, 2004 There is the problem, the tether needs to be visable for it to pull off when you take a spill!!! best place is the handle bar. Quote
DirtRider Posted June 26, 2004 Author Report Posted June 26, 2004 i didnt think there was much of a difference between a tether switch and a toggle switch. what i ment was a toggle switch. Quote
sredish Posted June 27, 2004 Report Posted June 27, 2004 what about mounting it on the frame under the seat area to where you can reach under the seat and flip it on or off. may work and not be visible. I've heard of people doing this but don't have any pics or anything. Quote
Wallrat Posted June 27, 2004 Report Posted June 27, 2004 I used cable ties to attach mine to my frame near my radiator. Can't see it but you can reach in the plastic and flip it on or off. Quote
Klotzban1 Posted July 4, 2004 Report Posted July 4, 2004 I run my tether on the left side of my billet handle bar clamp...(about couple inches or so). My hands are on the bars most of the time and the cord isnt much of a bother. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.