2004LEBanshee Posted May 26, 2004 Report Share Posted May 26, 2004 If I buy these reeds do I need to buy anything else to properly install them? Such as gasket's. And are the instructions pretty explainitory? Also I'm at 340's, stock pilots, and 4th notch should I expect any jetting changes and where? Thanks, Jason Quote Link to comment Share on other sites More sharing options...
die_infidel Posted May 26, 2004 Report Share Posted May 26, 2004 Mine came with the reed gaskets and directions. Also says no jetting changes nessesary if you just put those in with no other changes. I would still keep on eye on your jetting just to be safe. Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted May 26, 2004 Author Report Share Posted May 26, 2004 Thanks alot Quote Link to comment Share on other sites More sharing options...
baddboyy21 Posted May 27, 2004 Report Share Posted May 27, 2004 You may have to go 1 notch leaner on the needle. This means moving the clip up one notch. I have the Delta 2's and went 1 leaner and it is right on. Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted May 27, 2004 Author Report Share Posted May 27, 2004 back to the middle clip? Quote Link to comment Share on other sites More sharing options...
sandman121383 Posted May 27, 2004 Report Share Posted May 27, 2004 i have them and i could notice the throttle response with them. not sure on ur jetting question tho. i never had any problems Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.