Hockey390 Posted May 15, 2004 Report Posted May 15, 2004 UPS guy stopped by and dropped me off my beloved Trinity Single carb setup, nearly cried.. I went with the 35 mm carb, because I plan on porting this winter.. So jetting is gonna be a challange. Anyone that has done this with a 35mm and no porting, contact me or post. I want to see what kinda jets you ran. My mods are listed in my sig, take a look at tell me what you think I should start with.. They gave me 185 and 190's, plus whatever is in there right now.. maybe 180's? and they gave me 50's and 55's, then whatevers in there currently.. I will probably just try all 3, single carbs are so much easier to jet Quote
FoxBansheeRacing Posted May 15, 2004 Report Posted May 15, 2004 Whats your elevation? I am 0-500 ft above sea level and on a ported motor I am running a 175 main, 50 pilot, and middle clip on the needle. Quote
Hockey390 Posted May 15, 2004 Author Report Posted May 15, 2004 I'm at about the same, i wont be more then 100 ft above, i live in michigan. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.