LIsurfer_ Posted May 11, 2004 Report Posted May 11, 2004 Does anyone have a trick to removing the pieces of gasket that stay on the base after removing the jugs? Is scraping with a razor blade adviseable? Can I damage the surface if I use the blade? Thx Quote
J..J. Posted May 11, 2004 Report Posted May 11, 2004 I also use a blade, and yes you can damage the sealing surface if you're not careful. Be sure to cover the exposed area of the crankcase with a rag or paper towel to prevent any shavings from falling in. Quote
DIRTBIKEZ Posted May 11, 2004 Report Posted May 11, 2004 Theres a product made specifically for removing old gaskets called "Gasket Remover" . Real nasty stuff in an aresol can but works well. Quote
frocashmoney24 Posted May 12, 2004 Report Posted May 12, 2004 razer blade,or a gasket remover tahts kinda lika razer, and when u do it make sure u get ALL of that crap out, u need a clean surface for a good seal Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.