Rattle In The Flywheel

[thecabinboy]

Some little stuff rattling in there is the bad?

[frocashmoney24]

yea man thats bad, hope its not ur degree key but i dont know how that would get out, pop off the cover n see what u got, just dont want it get jam the flywheel or get stuck to it and throw it off balance

[dnhyoung]

Some little stuff rattling in there is the bad?

Better check it, When I had a little rattle in mine, It had come loose. Luckily it didn't mess up anything or I would of been pissed off. Lesson Learned. Double check that you torqued everything!!!!!

[boonman]

Pull the flywheel off. have a look see. Check the stator to be sure it's tight. Check everything over. Put it back together, and see what you got.....

[thecabinboy]

the rattle is on the flywheel itself.

[boonman]

When you grab hold of the flywheel, does it have slop? It could have come loose. The rivets could have come loose, but I doubt that very much. I am thinking that something is loose under the flywheel.....

[ledofthezep]

Your pickup coil isn't hitting the pickups on the flywheel is it?

[boonman]

God I hope not Led!!!! For the sake of ALL Shee owners...

[ledofthezep]

Me too....after I got in a hurry & installed my new stator I neglected to remember to adjust it. So when I got it back together & kicked it once, all there was was a rattle on the left side. I though, "that's no good" & pulled it all back apart, sure as chit, GD pickup coil was 'rattling' on the flywheel pickups. Luckily it only grazed it, no damage done at all...probably a good thing I didn't kick the crap out of it though! That woulda sucked. Just goes to show that it pays off to take your time & double check overthings before you try them the 1st time.