fixitrod Posted March 16, 2004 Report Posted March 16, 2004 How can you help with springs? I may need a new rear one Quote
DUNEDEMON Posted March 16, 2004 Report Posted March 16, 2004 I work for Eibach Springs, and help HQ members by offering advice (for free) and springs at my employee cost. We have coil-over type springs to fit most aftermarket shocks, and direct replacement rear springs for the OEM rear shock on most ATV's. The rears are important if you have made a swing arm length change. Rear springs are $50 plus shipping. Quote
checkster Posted March 17, 2004 Author Report Posted March 17, 2004 checkster if you are going to need new springs I can help you out in that dept. Demon, Funny you mentioned that as I already had you in mind.....LOL Anybody that needs springs, dunedemon is the man! Cheap, fast, and can figure out what you need. Give him a shout check Quote
Jeffro Posted March 17, 2004 Report Posted March 17, 2004 dunedemon.. I'd like one of those spings for a +4 arm. what do i need to do? Quote
DUNEDEMON Posted March 17, 2004 Report Posted March 17, 2004 Tell me how much you weigh, what type of riding you do, and tell me if your swing arm uses all the OEM linkage, tell me if your rear shock has been re-valved etc.. based on that I'll reccomend a spring rate (we can discuss your options here) you paypal me $50, I send you a spring. Quote
Jeffro Posted March 17, 2004 Report Posted March 17, 2004 I weigh 220, No revalue on shock, stock linkage, desert, dune riding, +4 arm Quote
DUNEDEMON Posted March 17, 2004 Report Posted March 17, 2004 Jeffro, to gat you back close to a stock rate equivalant you need to go with a 450 lb/in spring on the rear. Quote
Jeffro Posted March 17, 2004 Report Posted March 17, 2004 I'll take it. so how much shipping and do I need spring compressor to get the old one off? Quote
theeechozen1 Posted March 17, 2004 Report Posted March 17, 2004 hook up on springs! yipeee, I'll hit ya up with a pm soon Dunedemon... I am going with my stock swinger legthened out 2", and revalving my stock shock with gold valves. 260lbs, mostly dune riding... I am tryin to build my bike to pummel the whoops. Quote
DUNEDEMON Posted March 17, 2004 Report Posted March 17, 2004 Jeffro, send me a PM with your shipping address & info, so I can figure shipping. Yes you will need a spring compressor. theeechozen1, no problem, just let me know when you're ready. Quote
theeechozen1 Posted March 17, 2004 Report Posted March 17, 2004 kool, I am going to Reno for a couple months as of the 29th, so I am not sure if I will get it done before I go or not, but 50 bones is better than the 85 the shop will charge me when they rebuild the shock, I look forward to walking in with my own shock. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.