Brian G Posted March 14, 2004 Report Posted March 14, 2004 Hey guys, what is the number to the stock needles? The 3 letter number that is stamped on them I mean. Thanks Quote
zilladude Posted March 14, 2004 Report Posted March 14, 2004 first #-length second- amount of taper(may have 2 digit code for dual tapers) third#- material/type of coatings & start of taper This was in my Ski-Doo race manual Quote
sredish Posted March 14, 2004 Report Posted March 14, 2004 I think he wants the actual numbers of the stock needle. I don't know off hand and my manual is in the shop. I'll get it later if no one else chimes in first. Quote
scotts96fast Posted March 14, 2004 Report Posted March 14, 2004 Hey guys, what is the number to the stock needles? The 3 letter number that is stamped on them I mean. Thanks To get stock numbers for all banshee parts you can go to rivaracing.com they have a parts finder.But to get the part # you have to put the part in your part basket to buy and than just close it out.(no need to buy anything) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.