bluescreamer02 Posted February 20, 2004 Report Posted February 20, 2004 I just put a new throttle cable on my shee and now it wont idle i dont know what the problem is , i may have not of set them right at the carbs? but i tried a few times and just cant get it without it being running, can anyone help me Quote
silveradohd Posted February 20, 2004 Report Posted February 20, 2004 Make sure the slide's were not put in backwards. Look at the slide, there is a grove on one side and a pin on the side of the carb where it slides through. Hope this helps. Quote
sredish Posted February 20, 2004 Report Posted February 20, 2004 Make sure the slide's were not put in backwards. Look at the slide, there is a grove on one side and a pin on the side of the carb where it slides through. Hope this helps. like he said, make sure they weren't put in backwards, and make sure that they were put back into the correct carb and not switched. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.