Big Blue Posted February 16, 2004 Report Posted February 16, 2004 someone with the 2:1 filter setup measure the inside diameter on the carb boots. Quote
bigwill Posted February 17, 2004 Report Posted February 17, 2004 26mm Same size as stock carbs-if you need to get them on 28s-heat the ends up with boiling water-about 30sec. They will soften enough tostrech over,allow to cool on cabs and they will stay that size. Quote
Cotton eyed Joe Posted February 17, 2004 Report Posted February 17, 2004 26mm Same size as stock carbs-if you need to get them on 28s-heat the ends up with boiling water-about 30sec. They will soften enough tostrech over,allow to cool on cabs and they will stay that size. Shit sometimes I have to do that just to get them on the stock carbs. Good tip though. Quote
Creole Posted February 17, 2004 Report Posted February 17, 2004 I gotta do that with my condums...........hahaha j/k Quote
bigwill Posted February 17, 2004 Report Posted February 17, 2004 Stop useing trick ballons----only-kidding-just couldnt resist Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.