Jump to content

Recommended Posts

Posted

ok this isn't a banshee problem but i'm hopin maybe one of u guys can help. my friend has an 86 polaris indy 500 sled. it's a big twin cyclinder 2 stroke. the guy he bought it off of said it keeps blowing the cdi box. right now it has spark but my friends afraid to run it cas he doesn't want to blow the new one that he gave him with it. so what could cause this? could it be a voltage regulator? hopefully somebody can shine some light on this problem. sorry for the long post

Posted

CDI's arent' cheap, I'd be afraid to run it too. I dunno, on a Banshee the voltage regulator is on a completely separate circuit from the CDI, it's only there to keep the headlight/taillight bulbs from blowin'. I guess if it was mine I'd find a wiring diagram and/or a service manual and see what goes into the CDI and test from there. Good luck.

Posted

ya i kno they're not. the banshee's the only thing i and he can relate it to. when we had some electrical probs we'd troubleshoot it and be set but with this snowmobile we're not sure what to do. the box labeled "CDI Ignition" has the plug wires coming out of it so it seems to be the coil as well. i know that a voltage regulator is most likely for lights and accessories but a regulator of somekind is the only thing i can thnk of right now. it runs. he's got spark and ran it for a couple minutes to make sure it does run so it runs fine. anyopne have an other ideas? could it be a bad stator or timing problem maybe?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...