Banshee carbs

[Weston_]

Okay guys,  i have a mikuni 28 mil carb with 280 jets 25 pilot,i just bought Kehihn 28 mil carbs, what is the diffrence, do we need to put a bigger or smaller jet to equlize it out, what comes stocky in the pwk carb, please give me some info on this.  

[#1JUANstunna]

Jet sizes in these carbs aren't the same. Each brand has its own numbering for the size.

 

[Weston_]

Thats what im confused about could you explain that to me, im running a 280 in the mikuni and we want to make it leaner so down toa 260, what size woupld i put in the Pwk 

[ATV_hub]

17 hours ago, Weston_ said:

Thats what im confused about could you explain that to me, im running a 280 in the mikuni and we want to make it leaner so down toa 260, what size woupld i put in the Pwk 

There is no explaining, they’re just different

21 hours ago, #1JUANstunna said:

Jet sizes in these carbs aren't the same. Each brand has its own numbering for the size.

 

Also, that sounds like a crazy big jump in jetting.

But if you want a reference my jetting for pwk 28’s is 150 main 50 pilot, jjh needle on the middle clip (If I remember correctly). All my mods are listed.

-Ben

[Weston_]

well what sizes come stock in it? im just asking what would i run the pwk that equals to the 260 in the mikunis 

[ATV_hub]

I would say about 145 is somewhere close to 260 for a banshee (at a guess) but start a few sizes higher and only drop one size at a time.

-Ben