Mobilemechanic Posted June 9, 2018 Report Posted June 9, 2018 I have a 4mill stock cylinder with aggressive dune port need to know where I should start with jetting I'm at sea level i have pwk 33 v force 3 reeds shearer pipes +7 timing running vp c12 Quote
Rippin'n'Runnin Posted June 9, 2018 Report Posted June 9, 2018 I'd probably start 55 pilot 155 main and work down from there. Needle on middle clip and air screw 1.5 turns out. I'm running 33 pwk on a stock stroke dune port set up and I'm a 42 pilot 148 main and it's still a tad rich Quote
christoph.tamz Posted June 9, 2018 Report Posted June 9, 2018 Elevation?Sent from my SM-N920V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.