sr73087 Posted October 8, 2017 Report Posted October 8, 2017 My 98 has an issue where the low beams work, however as soon as I flip on the highs the lights go out. Is this a normal issue? I have the helms, so I can take a look at the wiring but thought it could be helpful if anyone else has had this issue. Quote
sr73087 Posted October 9, 2017 Author Report Posted October 9, 2017 I ohmed out the switch and it looks like the issue is there. The bike is a Frankenstein and looks to have the old circle plug with something wire nutted and tapped on the harness. I'll have to pull this apart and see if it was originally a harness from a 98 and they made an older switch work. Quote
JUSTWANNARACE Posted October 9, 2017 Report Posted October 9, 2017 Are they stock lights. Most after market don't have high and low Quote
Banshee SE Posted October 9, 2017 Report Posted October 9, 2017 If they are the stock ones I would change the bulbs. Quote
sr73087 Posted October 10, 2017 Author Report Posted October 10, 2017 22 hours ago, JUSTWANNARACE said: Are they stock lights. Most after market don't have high and low They are stock as far as I know. If I needed a different bulb I would think they would just stay lite rather than going out when flipped to high. 22 hours ago, JUSTWANNARACE said: 22 hours ago, Banshee SE said: If they are the stock ones I would change the bulbs. That was the first thing I did. Quote
sr73087 Posted October 29, 2017 Author Report Posted October 29, 2017 So they are duel filament with a high and a low but the switch is off of an older banshee with the circle plug and some hack wiring. One bulb did have one filament out, but the other was fine. They both go out completely with the high beam switched on. Quote
boarder8135 Posted November 4, 2017 Report Posted November 4, 2017 I would have Kompulsive concepts make you a new harness to rule out any wiring issues and also eliminate the tors wiring that may still be on the wiring harness. I had wiring issues with mine and went that route and was extremely happy with the product and shipping time. Tell him what your issue is also and he might be able to pin point it Quote
Ayesully810 Posted November 9, 2017 Report Posted November 9, 2017 I would have Kompulsive concepts make you a new harness to rule out any wiring issues and also eliminate the tors wiring that may still be on the wiring harness. I had wiring issues with mine and went that route and was extremely happy with the product and shipping time. Tell him what your issue is also and he might be able to pin point itCory is the man. That will be the first mod to every bike i ever build and has been so far. A kc harness. Sent from my LGMS210 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.