Bikelife305 Posted July 26, 2017 Report Posted July 26, 2017 i'm having a issue with my shee. the issue im having is that my right side while the bike on idle it stay cold as soon as i hit the throttle it fire right up on high rev but once i let go it feel like it shuts off while the left side stay running, carbs are sync good, both slider in the right way, Piston were Recent Changed, i have swap the plug wire ans the problem stay on that one side then i have swap carbs from the left to the right and the problem stays on the right side, i have rebuild carbs. both cylinders has same PSI. what Could it be please Help!!! Quote
sleeper06 Posted July 26, 2017 Report Posted July 26, 2017 Reeds, air leak. How did you sync the carbs most banshee owners get confused between cable pull and sync 1 Quote
Bikelife305 Posted July 26, 2017 Author Report Posted July 26, 2017 Reed are good, where could i have a air leak? all gasket new, i sync them by the top caps on carbs. 1 Quote
rjdgriff Posted July 26, 2017 Report Posted July 26, 2017 Pressure test it to find air leakGiving away "TSS" for FREE!!! Quote
Columbus350 Posted July 26, 2017 Report Posted July 26, 2017 Probably not synchronized perfectly best way to do it is buy the tool from FAST Sent from my iPhone using Tapatalk Quote
Bikelife305 Posted July 26, 2017 Author Report Posted July 26, 2017 but wont both side act up if it was a airleak??? Quote
Bikelife305 Posted July 26, 2017 Author Report Posted July 26, 2017 Should the bike shut off when pulling one spark plug wire or would it just shut off the side that the wire was pulled off? 1 Quote
Columbus350 Posted July 27, 2017 Report Posted July 27, 2017 Should the bike shut off when pulling one spark plug wire or would it just shut off the side that the wire was pulled off?Nope shouldn't kill the whole bike only the side that you pullSent from my iPhone using Tapatalk Quote
Bikelife305 Posted July 27, 2017 Author Report Posted July 27, 2017 14 minutes ago, Columbus350 said: Nope shouldn't kill the whole bike only the side that you pull Sent from my iPhone using Tapatalk Well it's cutting the whole bike off.... I try a different cdi and coil and still the same... could it be wire harness? Quote
Columbus350 Posted July 27, 2017 Report Posted July 27, 2017 Well it's cutting the whole bike off.... I try a different cdi and coil and still the same... could it be wire harness?No your problem is because it's only running on one cylinder, you're most likely pulling the plug on the one cylinder that is actually running . From your symptoms you said above it's only running on one cylinder at Idle that would explain why when you pull the plug it killsSent from my iPhone using Tapatalk Quote
Columbus350 Posted July 27, 2017 Report Posted July 27, 2017 You may think the carburetors are synced but you'd be surprised how far you could be off without the toolSent from my iPhone using Tapatalk Quote
Bikelife305 Posted July 27, 2017 Author Report Posted July 27, 2017 15 minutes ago, Columbus350 said: No your problem is because it's only running on one cylinder, you're most likely pulling the plug on the one cylinder that is actually running . From your symptoms you said above it's only running on one cylinder at Idle that would explain why when you pull the plug it kills Sent from my iPhone using Tapatalk No I'm pulling plug off the cold side that's Not running. Quote
Bikelife305 Posted July 27, 2017 Author Report Posted July 27, 2017 (edited) I started the post with what I was getting first so I kept trying to troubleshoot it and I ran in to this new issue about the bike shutting off Edited July 27, 2017 by Bikelife305 Quote
Columbus350 Posted July 27, 2017 Report Posted July 27, 2017 I see what's the fire look like on right side . Weak or strong Sent from my iPhone using Tapatalk Quote
Bikelife305 Posted July 27, 2017 Author Report Posted July 27, 2017 3 hours ago, Columbus350 said: I see what's the fire look like on right side . Weak or strong Sent from my iPhone using Tapatalk Will check on that in the morning Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.