Roz Posted July 16, 2017 Report Posted July 16, 2017 New to this sight but need help. Was wondering if anyone has a way other than swapping parts to check for intermitten or weak spark? Have 135 psi compression and everything else obvious checks out but won't start without starting fluid and left side exhaust is cold Quote
edgehanger Posted July 28, 2017 Report Posted July 28, 2017 Yep. OHM meter and visual checks. Check the pilot jets and make sure the float bowls are on the right carbs Quote
Ayesully810 Posted July 28, 2017 Report Posted July 28, 2017 remove spark plug, place penis in spark plug hole, then kick over 1 Quote
sleeper06 Posted July 29, 2017 Report Posted July 29, 2017 Get inline spark testers. Ohm out caps, coil, stator , check pickup gap, sync carbs with vacuum gauge . It could very well need more fuel or idle circuits could be clogged, they are a needle sized hole Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.