salmon_slayer06 Posted December 21, 2016 Report Posted December 21, 2016 I'm removing stock air box and going with proper size billet intakes to fit my 35mm keihn carbs. I'm tired of wrestling that damn air box with the tight fitting boots. Now... what is standard procedure for most of you guys running the filter pods? Quote
camp0429 Posted December 21, 2016 Report Posted December 21, 2016 You will have to secure your wiring harness different since the harness would normally be held by the airbox. Make sure you watch the little tabs on your frame for the airbox, they will rub a hole in the pods and may need cut off. You may need angled pods, I have PWK 28's and straight pods fit decent Quote
camp0429 Posted December 21, 2016 Report Posted December 21, 2016 And probably need to bump your mains up a couple sizes and plug chop from there Quote
rjdgriff Posted December 21, 2016 Report Posted December 21, 2016 Like camp said ^^ Sent from my iPhone using Tapatalk Quote
Time Machine Posted December 21, 2016 Report Posted December 21, 2016 Then be sure to check the clamps that hold the filters onto the carbs before each ride just to stay on the safe side. Quote
salmon_slayer06 Posted December 21, 2016 Author Report Posted December 21, 2016 Okay. The intake boots support everything than I take it? What do you guys do with coolant reservoir? Quote
broke350 Posted December 21, 2016 Report Posted December 21, 2016 ^Yep, or you can buy a relocation bracket from JDS Customs if you want to keep yours. Quote
camp0429 Posted December 21, 2016 Report Posted December 21, 2016 Just run the overflow hose straight from the radiator and zip tie to frame down to about your a arms Quote
salmon_slayer06 Posted December 22, 2016 Author Report Posted December 22, 2016 Gotcha. Would be nice to finally get rid of that thing. heck may as well relocate my Cdi. Thanks for the info feel better about the project. Quote
rjdgriff Posted December 22, 2016 Report Posted December 22, 2016 Cory Kennedy makes a killer harness that cleans everything up nice Sent from my iPhone using Tapatalk Quote
salmon_slayer06 Posted December 23, 2016 Author Report Posted December 23, 2016 Just ordered billet intakes, 8 " angled pods w/ outerwears, cdi under tank relocator and swing arm bearings and bolt. Checked out Cory wire harnesses on facebook looks like quality stuff good price. Should be able to bump jetting up. Might mess with needle on my carbs. Heard there's been guys getting more mid power on the richer needle. With shearer pipes should be making 50 horse easy. After this my future plans are for a drag bike. Quote
ClutchLuck24/7 Posted December 29, 2016 Report Posted December 29, 2016 Man I never even seen a stock Banshee airbox lol.. Every Banshee I have ever seen has the airbox removed.. I want to see this unicorn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.