Jump to content

Recommended Posts

Posted

Just stopped all of the sudden.. I switched the plug wire and still right cylinder no fire. I have compression in that cylinder. What do I need to check/do next?

Posted

Tried 2 plugs. I'm almost positive I got no spark from the plug on the right side. I checked it a bunch of kicks and never really saw a spark, and I noticed the spark immediately when I tried other the other side. I'm not sure where to go next.

 

I read somewhere that it could be carbs out of sync? I was about to sync them before this happened. Does anyone have a good recommendation on the best sync thread.. some of them are more confusing than helpful.. I have the sync tool

Posted

Man I know how it sounds, but like I said when I took the plug out and tried to see a spark I couldn't.. is there a different way to test?

Sure there is. Just hold the wire while a buddy kicks it.

 

Sent from my LG-H811 using Tapatalk

  • Like 1
Posted

Man I know how it sounds, but like I said when I took the plug out and tried to see a spark I couldn't.. is there a different way to test?

Well when you swapped plug wires & it made no difference, then I would be looking for a leak on the on intake. Start it up & while it's running spray some brake or carb cleaner around the intake boots & take note if it changes the engine it's idle.

 

Sent from my ZTE T84 using Tapatalk

Posted

Check your reeds too. I had an incident where my left cylinder wouldn't run, tried both plug caps on the right cylinder and it fired right up. Took my reeds off, was missed an entire pedal off one side, replaced it and ran great. Just a thought

 

 

Sent from my iPhone using Tapatalk

Posted

Check your reeds too. I had an incident where my left cylinder wouldn't run, tried both plug caps on the right cylinder and it fired right up. Took my reeds off, was missed an entire pedal off one side, replaced it and ran great. Just a thought

 

 

Sent from my iPhone using Tapatalk

 

Winner!!!   I bought some reeds used about a week ago. They blew apart 45 seconds into being installed. Thanks for the help folks!

Posted

Yea. Once I realised I had spark on both sides I took the carbs apart and cleaned the hell out of them. While I was in there I checked the reeds and the petal was broken. You nailed it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...