Am I missing something here? (LECTRON 39mm)

[B22]

Hi guys, first time I've taken these carbs apart to thoroughly clean and inspect them and I'm a little confused. I believe there are supposed to be 2 floats, however I only have one inside one of the two. Is this normal or what?

 

Ignore the shit inside it, that's why it's apart. Lol

 

 

 

Sent from my iPhone using Tapatalk

[sheerider11]

It's a drag thing. More room for fuel, less weight, maybe yours is missing.

But regardless, ive seen ddrag guys do it.

[tdod101]

Weird

[B22]

Ok I'll check the other one and see if they're both like that.

 

It caught me off guard, just wanted to ask you all.

 

 

Sent from my iPhone using Tapatalk

[B22]

So I'm not familiar but which side would it go on? It seems to be offset. It fits snug on one side and loosely on the other

 

 

Sent from my iPhone using Tapatalk

[B22]

When I say snug I mean in relation to the gold piece (not sure on the name)

 

 

Sent from my iPhone using Tapatalk

[wayne_smith97]

When I say snug I mean in relation to the gold piece (not sure on the name)

 

 

It should be relatively loose against the float tang thing

 

Sent from my iPhone using Tapatalk

[B22]

Okay

 

 

Sent from my iPhone using Tapatalk

[m671054]

Make sure they dont hang up on the bowls. Usually there are clearance issue with billet bowls. Also the float pin goes furthest away from needle valve when running a pump. Those look like alky needle and seat 3.3 is for a pump.

[J-Madd]

I would get the other float in there, especially if those are pumpers.