zillakilla02 Posted April 2, 2016 Report Posted April 2, 2016 68mm cub top end set up for stock stroke crank. Needs replating. Wrist pin circlip came loose and gouged the cylinder wall in right side cyl. Never been ported. Could use a good clean up port once they are replated. I was told about $300 for replating from millenium so I'd like to get $250 out of these since they need work. I live near millenium so I could drop them off there if you wanted me to otherwise I'll ship anywhere in the USA. Prefer paypal gifted no scams Quote
465Boss Posted April 2, 2016 Report Posted April 2, 2016 So why won't u jus get them fixed since u are so close and to save us the shipping hassle and wait time.. I definitely need these.. Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 So why won't u jus get them fixed since u are so close and to save us the shipping hassle and wait time.. I definitely need these..I don't want to invest 300 dollars into them and have them not sell Quote
465Boss Posted April 2, 2016 Report Posted April 2, 2016 Are u sure it would only b 300 to fix? It would b sad to get these and it cost more.. Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 Are u sure it would only b 300 to fix? It would b sad to get these and it cost more..To be honest I really can't say for sure that was a quote but I guess anything can change. If you are serious about buying I'd be willing to take them up there and have it quoted in person next week Quote
465Boss Posted April 2, 2016 Report Posted April 2, 2016 I would definitely like to kno before I buy, jus a safety net Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 I would definitely like to kno before I buy, jus a safety netI 100% understand. I'll see what I can do to get a for sure price on repairing them. Thanks for the interest Quote
sheerider11 Posted April 2, 2016 Report Posted April 2, 2016 300 to re plate. Do they need any weld? Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 300 to re plate. Do they need any weld?No I don't believe they do but I'm not an expert. In the pics I posted of the gouges that's the worst of the damage but I'm not sure if those gouges require welding or just plating. The gouge goes right over one of the transfer ports that's the only area I'd question about needing welding Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 300 to re plate. Do they need any weld?Do you know how much more it costs if they need welding? Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 The scratch going thru the exhaust port and transfer is the area I question Quote
sheerider11 Posted April 2, 2016 Report Posted April 2, 2016 Do you know how much more it costs if they need welding?No idea. STOCK CYLINDERS FOR LIFE!! Sent from my SAMSUNG-SM-G890A using Tapatalk 1 Quote
Surfrjag Posted April 2, 2016 Report Posted April 2, 2016 Welding is like $60 if its not to bad Quote
zillakilla02 Posted April 2, 2016 Author Report Posted April 2, 2016 No idea. STOCK CYLINDERS FOR LIFE!! Sent from my SAMSUNG-SM-G890A using Tapatalk Hey I'm right there with ya man I took these off and put my ported stock cylinders back on. Alot better for trail riding. Now I want to fund a 4 mil crank so these gotta go Quote
465Boss Posted April 2, 2016 Report Posted April 2, 2016 Why are these not good for trail riding? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.