buddhabanshee Posted January 4, 2016 Report Posted January 4, 2016 Hey guys, just thought I'd share my taillight that I made. Didn't like the big ugly one that my 03 had on it so I made my own. Starting point... Cut the top lip off that actually mounts to the grab bar. After grinding the edge and making it look decent I painted it. Then I ordered a RED SIDE EMITTING LED STRIP from superbrightleds.com and stuck it to the mounting piece and zip tied it just in case... Sent from my SM-G900V using Tapatalk 1 Quote
So Cal Suspension Posted January 4, 2016 Report Posted January 4, 2016 Ditch the blue and white zip ties for black ones. Oh shut up 1 Quote
buddhabanshee Posted January 4, 2016 Author Report Posted January 4, 2016 Ditch the blue and white zip ties for black ones.Lol I did. When I first put it together I didn't have any black ones. They're all black now Quote
willaduncan Posted January 4, 2016 Report Posted January 4, 2016 Looks good ... You could just epoxy it on and ditch the ties all together Sent from my iPhone using Tapatalk Quote
buddhabanshee Posted January 4, 2016 Author Report Posted January 4, 2016 Looks good ... You could just epoxy it on and ditch the ties all together Sent from my iPhone using Tapatalk Well the strip has tape on it. The ties are just in case it decides to come loose. But yea that would've worked too! Sent from my SM-G900V using Tapatalk Quote
willaduncan Posted January 4, 2016 Report Posted January 4, 2016 Yea the 3M will work great until it gets some dirt embedded in... I was just saying if you epoxy it in it would be near permanent... None the less good mod for cheap Sent from my iPhone using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.