Hard To Pull Clutch....

[sandbuzzard]

I have changed clutch perch, lever, cable w/lube, and clutch kit (dirt diggers).

This thing gets to be a monster to pull. I cant take the stiffness out ot it. My next step is a new basket. It is a 92 and still has the stock basket in it. Do you guys think this could be the issue?

 

 

Thanks

[BitchenBanshee]

there are 3 things that effect clutch pull and the basket has nothing to do with it.

 

1. springs. There could be some aftermarket ones installed

 

2. Bad cable routing / damaged cable / unlubed cable

 

3. Clutch perch. a MSR EZ-Pull type will be much easier to pull than a stock type!

 

Good luck!

[tithead]

if its still hard to pull after what the guy above said take it apart and soke it in wd40 and clean it up.

[Dragg-on]

DUDE..... get a new cable, I did it and WOW! only 12$

[Wassup350]

one thing if you put a new clutch in, i would have every other clutch spring be stock. Then every other one an aftermarket spring. I have an MSR raptor clutch lever with a motion pro terminator cable and a white bros ez-pull. This set up makes for an extremely easy clutch pull. I could barely feel it. The problem now i have is that my ezpulls cable is frayed and i dont know where to find a new one. Also i would get a cable luber, rather then just spraying WD-40 down the cable in hopes that it gets through. A cable luber will push the lube through the cable very nicely.

[MULLET~BOY]

i just grew some nuts and got used to it

[banshee boy 98]

barnett springs are just that stiff. get use to it.