slag_350300 Posted November 1, 2015 Report Posted November 1, 2015 Hey guys I'm looking for three of the washers for the top case half that sand which between the frame mount and engine case mount. They appear to be rubber mounted PayPal ready and need them asap. Thanks Quote
slag_350300 Posted November 1, 2015 Author Report Posted November 1, 2015 Engine spacer damper is what the parts schematic labels them Quote
sheerider11 Posted November 1, 2015 Report Posted November 1, 2015 The D shaped one? If so they only need 2. Some run 4 myself included Quote
slag_350300 Posted November 1, 2015 Author Report Posted November 1, 2015 Yea those are it. I just got my case and top end back and noticed I only had one. Wasn't sure if they were stuck on the case and lost during transport or service work. They come stock with two in the front correct ? Quote
sheerider11 Posted November 1, 2015 Report Posted November 1, 2015 No they go on opposing sides. Not sure which sides. I think right rear and left front. Quote
slag_350300 Posted November 1, 2015 Author Report Posted November 1, 2015 Ohhhh okay. But you run four of them and they all fit fine? Quote
sheerider11 Posted November 2, 2015 Report Posted November 2, 2015 Ohhhh okay. But you run four of them and they all fit fine?Yeah. It can be a bit of a bitch but it'll go. Quote
willaduncan Posted November 2, 2015 Report Posted November 2, 2015 Agreed run 4 it just makes sense Sent from my iPhone using Tapatalk Quote
jeff n Posted November 6, 2015 Report Posted November 6, 2015 If you run 4, do 2 of them have to be upside down? Sent from my VS985 4G using Tapatalk Quote
slag_350300 Posted November 7, 2015 Author Report Posted November 7, 2015 I just ordered 2 from rattle can ray and he sent me three. So I'll be putting in 4 of them his weekend. And yea you will have to flip them over Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.