Strm Trpr Posted June 22, 2015 Report Posted June 22, 2015 I will post pics tonight when I get home. This transmission was ProMod'd by Jared, (BigRed350x). Camatv had his hands on this tranny too. Transmission was completely gone thru and verified in legit, ready to do business condition. Comes complete with shift forks and shift rails. Drum is cut and needle roller bearing is installed. Every other dog is cut on 2nd, 3rd, 4th and 5th gears. Asking $200 Paypal gift and I'll cover shipping to lower 48. Stay Tooned for pics this evening!! Quote
BANSHEEBEEFM2M Posted June 22, 2015 Report Posted June 22, 2015 I think I want it hmu when you post pix 1 Quote
sheerider11 Posted June 22, 2015 Report Posted June 22, 2015 If both bigred and camatv ha this trans and say it's good to go I'd consider it a good trans. It's at least not someone with a dremel just chopping dawgs. 2 Quote
Strm Trpr Posted June 22, 2015 Author Report Posted June 22, 2015 Right on Josh!! PM me your number, I lost it in my old phone. That's gotta be some sort of record. Damn thing sold in 1 min... 2 Quote
Strm Trpr Posted June 22, 2015 Author Report Posted June 22, 2015 If both bigred and camatv ha this trans and say it's good to go I'd consider it a good trans. It's at least not someone with a dremel just chopping dawgs. No way man!! They did it right for sure. Cut the dogs in a rotary vise on a mill using coolant!! I'm reluctant to sell it, but need to raise funds for that call to Redline. 1 Quote
BANSHEEBEEFM2M Posted June 22, 2015 Report Posted June 22, 2015 No way man!! They did it right for sure. Cut the dogs in a rotary vise on a mill using coolant!! I'm reluctant to sell it, but need to raise funds for that call to Redline. What u got goin on with redline what's the plan for the new build Quote
Strm Trpr Posted June 22, 2015 Author Report Posted June 22, 2015 everyone will know when it's time... Quote
Strm Trpr Posted June 23, 2015 Author Report Posted June 23, 2015 No way man!! They did it right for sure. Cut the dogs in a rotary vise on a mill using coolant!! I'm reluctant to sell it, but need to raise funds for that call to Redline. OK, let me rephrase, "The right way to cut is by using a rotary vise in an end mill with coolant." I read the correct way to cut transmission and for some reason I thought that's how this transmission was cut, well it's not. It appears to have been cut with a dremel, but done very, very well. Josh, if upon your initial inspection you do not like the transmission, send it back and I'll refund your money and your return shipping to me. But if you install it and run it, then it's yours to keep. But I'll tell you what, I bet you're gonna really like this transmission once you get it in your hands. This transmission is in unbelievable condition. There's no noticeable wear on any gear teeth and everything turns super smooth and the idler gear doesn't wobble at all. I'll let the pictures speak for themselves. 1 Quote
Strm Trpr Posted June 23, 2015 Author Report Posted June 23, 2015 Sold doeThanks Josh!!I won't be down for the 4th. My buddy and I are making a day trip on the 11th. And we'll be down for Labor Day. I hope to check out that 4mil cub!! 1 Quote
BANSHEEBEEFM2M Posted June 23, 2015 Report Posted June 23, 2015 Thanks Josh!! I won't be down for the 4th. My buddy and I are making a day trip on the 11th. And we'll be down for Labor Day. I hope to check out that 4mil cub!! Hell ya. Ill see you labor day then fam, thanks again 1 Quote
Strm Trpr Posted June 23, 2015 Author Report Posted June 23, 2015 Hell ya. Ill see you labor day then fam, thanks again I'll hit you up when we get to the beach Sat morning Sept. 5th. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.