joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 Troll. Lol. Nl . Trying to give him advice. He has LESS than 120 in each cylinder AND he can't even hold 6 psi on a leak down.... Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 Guys shut the fuck up unless you have advice and stop arguing with me. Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 This is a post about advice. Not arguing. Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 I just rebuilt this 4 mil stroker this weekend, dialed in carbs, had to run new stator leads box there was too much resistance in the lines. Ran rich, not due to jetting, due to weak spark, weak spark BC leads were overheated several times. I built it from a pile of parts. Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 Why don't you explain in detail what y'all do for a hobby. I will explain what I do for a living. Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 Service manual specifies, less than 120 psi....replace top end. And if you use stock b.s like Namura pistons/rings. You may still be at 120. But if you used any decent kit like pro x or vertex or wiseco, the dome is much more aggressive and you will have a 160+ comp reading. Quote Link to comment Share on other sites More sharing options...
joshuamstevens Posted June 1, 2015 Report Share Posted June 1, 2015 Trying to tune out burnt out rings never works. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 1, 2015 Report Share Posted June 1, 2015 I'll tell you what , you sound arrogant as fuck , giving info doesn't mean you belittle people while your at it . So what do you do for a living and keep acting like your gods gift to 2 strokes you won't last long here. I give info all the time but don't make people feel foolish 3 Quote Link to comment Share on other sites More sharing options...
70duster Posted June 1, 2015 Author Report Share Posted June 1, 2015 Theres no need to argue here I didnt do the compression test on a warm motor it was a cheap gauge and on top of it the motor did hold 6 psi for well over 6 min without a leak. So yes the motor is aged will need a rebuild some day. But not now Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted June 2, 2015 Report Share Posted June 2, 2015 Whoa whoa........settle down. No ones arguing, just the experienced guys telling oh my gosh Josh he's being fucking stupid! sent from yo mammy house 1 Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted June 2, 2015 Report Share Posted June 2, 2015 Whoa whoa........settle down. No ones arguing, just the experienced guys telling oh my gosh Josh he's being fucking stupid! sent from yo mammy house He's been here for a day, and everyone already thinks he's an idiot. 1 Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted June 2, 2015 Report Share Posted June 2, 2015 He's been here for a day, and everyone already thinks he's an idiot.Yeah, I wonder who it is. sent from yo mammy house Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted June 2, 2015 Report Share Posted June 2, 2015 Yeah, I wonder who it is. sent from yo mammy house He mentioned it in his genius thread, titled "worthless". And he was right. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted June 2, 2015 Report Share Posted June 2, 2015 He mentioned it in his genius thread, titled "worthless". And he was right.Haha I'll go check it out. sent from yo mammy house Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 2, 2015 Report Share Posted June 2, 2015 I was giving him the benefit of the doubt till he talked about building a 4 mil stroker like he just reinvented the wheel. Then I looked at the rest of his shop filled with shit you couldn't pay me enouph to work on. Oh well another guy that hates hq. If it wasn't for this site I wouldn't be close to where I'm at today. Duster if there's anyghing I can do for you let me know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.