tylerwking Posted May 1, 2015 Report Posted May 1, 2015 Ever since have installed a Hinson clutch basket I haven't been able to get my clutch to engage. any ideas or thoughts are welcomed thanks. Quote
tylerwking Posted May 1, 2015 Author Report Posted May 1, 2015 I have looked and don't see how it can be put on wrong Quote
do-work-son Posted May 1, 2015 Report Posted May 1, 2015 Pressure plate not lined is my guess. Take a picture of it and upload it. Quote
tylerwking Posted May 2, 2015 Author Report Posted May 2, 2015 I can't get pictures to load. How do you make sure its line up correct Quote
willaduncan Posted May 2, 2015 Report Posted May 2, 2015 Line the dot up with the arrow... It can be put on wrong Sent from my iPhone using Tapatalk Quote
tylerwking Posted May 3, 2015 Author Report Posted May 3, 2015 The pressure plate is lined up right and still nothing Quote
Rigid_Banshee Posted May 3, 2015 Report Posted May 3, 2015 Clutch adjustment could be wrong at the actuator arm is the arrow mark on top of the case lined up with the actuators pointed end ? Quote
AKheathen Posted May 9, 2015 Report Posted May 9, 2015 one of the 3 arrows at the dot. than back off the clutch cable. tighten the clutch adjuster so the arm on the canse moves 3/8-1/4" aside from the spring pressure on the lever. then adjust the cable so the arrows line up. done. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.