Overflow

[bansheefatty66]

I dont know whats goin on, my carbs wont stop pourin gas outa both carborators. i already took em apart and blew through everything. please help.

[BenBB]

FIRST try tapping on the bowls with the end of a large screwdriver, alot of times if the floats are stuck open this will knock 'em loose. If that doesn't work, take 'em back off, remove the float and clean the rubber tip of the float needle, make sure there's no dirt in the seat, and adjust the floats to 21mm (from the carb body without gasket). Got some stuff about setting the float in the Jetting FAQ . Good luck.