JDively910 Posted January 15, 2015 Report Share Posted January 15, 2015 I realize it is probably a dumb question but when my wheel hubs are tight their is very slight (as in less the a 1/16) daylight between the wheel hub and the key( side to side not up and down) Would I be OK to run it that way when I have it locked down or would I be better off getting new hubs..-thanks in advanced and please hold the ignorant comments... Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted January 15, 2015 Report Share Posted January 15, 2015 I can't answer that, idk but if you do need hubs u can use mod quad or fireball Quote Link to comment Share on other sites More sharing options...
JDively910 Posted January 15, 2015 Author Report Share Posted January 15, 2015 (edited) I have fireball hubs now the keyway seems to be straight the whole way by just seems there is very slight room between key and the keyway in hub... Edited January 15, 2015 by JDively910 Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted January 15, 2015 Report Share Posted January 15, 2015 My boy might have sum Honda patterns cheap Quote Link to comment Share on other sites More sharing options...
Factory350 Posted January 15, 2015 Report Share Posted January 15, 2015 Call and talk to Jeff @ JJ and A. If it is for sure a JJ and A axle he will help out. Do you have the original hubs? Or is it a full Fireball axle? If you have a JJ and A setup and they matching hubs are loose, he would probably warranty that. You will have slight play however due to the system utilizing the hub setup with pinch bolts. The hubs have to be able to slide over the 40mm shaft while the pinch bolts are loose. Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted January 15, 2015 Report Share Posted January 15, 2015 Call and talk to Jeff @ JJ and A. If it is for sure a JJ and A axle he will help out. Do you have the original hubs? Or is it a full Fireball axle? If you have a JJ and A setup and they matching hubs are loose, he would probably warranty that. You will have slight play however due to the system utilizing the hub setup with pinch bolts. The hubs have to be able to slide over the 40mm shaft while the pinch bolts are loose.This Quote Link to comment Share on other sites More sharing options...
possum Posted January 15, 2015 Report Share Posted January 15, 2015 its normal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.