main jets?

[banshee den]

I pulled my carbs apart to change main jet cause it sloppy on low rpms but hauls on high rpms

as of now the main is 160 .

I'm  at 1100Ft above sea level (might be 1000 or 1200)

 

I got T5 pipes

35 pwk carbs with DEK needles on top clip. 

boysen reeds (for now)

bored .50 over 

K&N filter (no air box lid)

 

what mains do you suggest to try 155 152 or 150?

 

[special06shee]

What make you think its your mains? You said it rips up top but "sloppy" down low. Id look into pilots or that needle might be too rich. Most likely needle. Try cel.

[banshee den]

what would the cel needles do?

[special06shee]

http://www.carbparts.com/keihin/needles_tuning/pj.htm

 

 

They can do whatever ya need them to do. Study up^^

[banshee den]

thanks

[special06shee]

Yup. Most guys have great luck with the cel needle. Ive ran them in the past too with good results.

[banshee den]

hope I have good luck with them.

[cyclewizzard]

I am at 1100 ft 35 pwk 48 pilots 155 main cel needle middle position on 91 octane if that helps

 

 

Sent from my iPhone using Tapatalk