jriffe23 Posted August 28, 2014 Report Share Posted August 28, 2014 ok so here is the deal, im building a 4 mil and i was wanting to know if i have to use 795 or can i use 513 without a spacer plate with the correct cut domes?? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted August 28, 2014 Report Share Posted August 28, 2014 110 or 115 rod? Quote Link to comment Share on other sites More sharing options...
jriffe23 Posted August 28, 2014 Author Report Share Posted August 28, 2014 115 rod. Sorry i forgot to put that Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted August 28, 2014 Report Share Posted August 28, 2014 No. The piston will contact the rod Quote Link to comment Share on other sites More sharing options...
jriffe23 Posted August 28, 2014 Author Report Share Posted August 28, 2014 So I have to have 795s? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted August 28, 2014 Report Share Posted August 28, 2014 Or the new 4 mil pistons that have the windows moved and the pin right. Quote Link to comment Share on other sites More sharing options...
Atomic Monkey Posted August 28, 2014 Report Share Posted August 28, 2014 Yes. They're meant to take up the 5mm of the longer rod when used with stock stroke. With the 4 mill you either have to run the spacer, or even better get the 11882 pistons with the 0.60 base gasket Quote Link to comment Share on other sites More sharing options...
Currie Motorsports Posted August 29, 2014 Report Share Posted August 29, 2014 795 or 573 Quote Link to comment Share on other sites More sharing options...
Atomic Monkey Posted August 29, 2014 Report Share Posted August 29, 2014 I'm doing a 4mil long rod with the 11882 piston. They're 1mm over deck with stock base gaskets instead of 2mm like the 795 or 573, and have the piston windows in the correct spot for the 4mil stroker. The 573 is a blaster piston and needs the correct dome shape... its different from the Banshee. The cheap way to use the 11882 piston is to get the thicker base gasket, or like I'm doing, adjust the port heights, and get the correct domes to compensate for the additional height. I think you can only find these pistons on Ebay. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.