TwistedMethods Posted May 21, 2014 Report Posted May 21, 2014 Bullshit I just tries to bolt up this crap stock exhaust it doesn't even want to fit proper . So pissed ! ....... Anyone have a cheap pair ? Could care less what they are or how beat they are just want somthing that works.... Sent from my iPhone using Tapatalk Quote
tdod101 Posted May 22, 2014 Report Posted May 22, 2014 http://bansheehq.com/forums/index.php?showtopic=175954#entry1612458 Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 Ya was wondering about his but people say don't buy from people who are that new Sent from my iPhone using Tapatalk Quote
sheerider11 Posted May 22, 2014 Report Posted May 22, 2014 Ya was wondering about his but people say don't buy from people who are that new Sent from my iPhone using Tapatalk You new too. I bought the stock cylinders from him. I text him and didn't gift my payment. He had no problem with that. Quote
wayne_smith97 Posted May 22, 2014 Report Posted May 22, 2014 You looking for stock or aftermarket Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 Aftermarket don't care if they are dinged up/rusty aslong as they function Sent from my iPhone using Tapatalk Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 Any of you guys know where I can get the T fitting for the fuel lines that come from the carbs to the petcoc ? Sent from my iPhone using Tapatalk Quote
sprinklerman Posted May 22, 2014 Report Posted May 22, 2014 Any tee will work. Sent from a van down by the river Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 Hm on the clutch side there's a air line I think could I take that T and block off that breather line ? Sent from my iPhone using Tapatalk Quote
sprinklerman Posted May 22, 2014 Report Posted May 22, 2014 Too small. Just get a proper sized tee at a hardware store. Sent from a van down by the river Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 Ok thank you Sent from my iPhone using Tapatalk Quote
sprinklerman Posted May 22, 2014 Report Posted May 22, 2014 No problem. Lowes , etc , should have a barbed tee that'll work. Sent from a van down by the river 1 Quote
Larry's Shee Posted May 22, 2014 Report Posted May 22, 2014 Any exhaust will require a bit of fitting. Every bike and every pipe is different, washer here, washer there. Have all parts connected before you start tightening bolts down. Quote
TwistedMethods Posted May 22, 2014 Author Report Posted May 22, 2014 It's stock headers with fmf silencers u know dual exhaust on a truck how u can get it angled out behind each tire .. Some dumb add did that with these lol so they are hard to fit an look super goofy . Can't wait to toss the whole exhaust Sent from my iPhone using Tapatalk Quote
Larry's Shee Posted May 22, 2014 Report Posted May 22, 2014 Proof that HillBilly mods don't work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.